K-type thermocouple assembly
Ø6 mm 304 sheath, 0–1100 °C, fixed thread and 2 m lead — the assembly local factories make by the thousand.
Line illustration. Photographs of the supplied unit and its nameplate are sent with the quotation.
Overview
A mineral-insulated K-type probe with a 304 stainless sheath, a stainless head and a ceramic terminal block. Sheath length and thread are cut to the drawing, so a replacement drops into an existing thermowell.
Specifications
| Type | K (NiCr-NiSi), single or duplex |
|---|---|
| Range | 0–1100 °C, class I tolerance |
| Sheath | Ø6 mm, 304 SS, length to order |
| Head | IP65 die-cast aluminium, ceramic block |
| Process connection | G1/2, M20 × 1.5 or 1/2 NPT fixed thread |
| Lead | 2 m fibreglass, stainless overbraid optional |
Typical values for this family. The datasheet issued with your quotation states the exact figures for the unit supplied.
Features
- Mineral insulation crimped and sealed against moisture ingress
- Cold junction welded, not twisted
- Head removable for transmitter retrofit
Options
- Duplex element for redundancy
- 316L or Inconel 600 sheath for aggressive atmospheres
- Spring-loaded fitting for a thermowell
Typical applications
- Furnace, oven and kiln temperature
- Flue gas and exhaust duct measurement
- Replacement of an existing probe by sheath length
More in Temperature
Same family, same quotation process. Open a product to compare parameters side by side.
PT100 resistance thermometer
Three-wire PT100 in a Ø6 316L sheath, −50 to 200 °C, for the accuracy a thermocouple cannot hold.
Bimetallic thermometer, Ø100
No power, no wiring: a bimetal coil in a stainless stem, −20 to 150 °C, read straight off the dial.
Head-mount temperature transmitter
Fits inside a standard connection head: PT100 or thermocouple in, 4–20 mA out, HART optional.