Head-mount temperature transmitter
Fits inside a standard connection head: PT100 or thermocouple in, 4–20 mA out, HART optional.
Line illustration. Photographs of the supplied unit and its nameplate are sent with the quotation.
Overview
A puck-sized transmitter that mounts under the cover of a WRK-230 or WZP-230 head and converts the sensor to a two-wire loop. It removes the long lead run that picks up noise next to a VFD.
Specifications
| Input | PT100 / PT1000 / thermocouple J, K, T, E |
|---|---|
| Output | 4–20 mA, two-wire |
| Accuracy | ±0.2 °C (PT100), ±0.5 °C (TC) |
| Range | configurable, sensor-matched |
| Supply | 12–36 V DC, loop powered |
| Protection | IP67 potted, –40 to +85 °C |
Typical values for this family. The datasheet issued with your quotation states the exact figures for the unit supplied.
Features
- Sensor-break and short detection flagged on the loop
- Configuration by PC or HART hand-held
- Fits DIN B heads and most stainless heads from local factories
Options
- HART 7
- Ex ia version
- Pre-assembled with the sensor and tested as one unit
Typical applications
- Retrofit a head that runs a long cable to the panel
- Skid packages where the PLC is far from the sensor
- Equivalent of an imported transmitter at a lower price
More in Temperature
Same family, same quotation process. Open a product to compare parameters side by side.
K-type thermocouple assembly
Ø6 mm 304 sheath, 0–1100 °C, fixed thread and 2 m lead — the assembly local factories make by the thousand.
PT100 resistance thermometer
Three-wire PT100 in a Ø6 316L sheath, −50 to 200 °C, for the accuracy a thermocouple cannot hold.
Bimetallic thermometer, Ø100
No power, no wiring: a bimetal coil in a stainless stem, −20 to 150 °C, read straight off the dial.