Adjustable pressure switch
Mechanical switch with a settable trip point and SPDT contact, 0.5–10 bar, for interlock and alarm duty.
Line illustration. Photographs of the supplied unit and its nameplate are sent with the quotation.
Overview
A spring-loaded piston switch with an external adjustment screw and a scale printed under the cover. It trips a relay or a PLC input without needing a transmitter, which keeps small skids cheap.
Specifications
| Set range | 0.5–10 bar, adjustable |
|---|---|
| Dead band | 0.3–1.0 bar, fixed by spring |
| Contact | SPDT, 5 A / 250 V AC |
| Connection | G1/4 female, brass |
| Wetted parts | Brass body, NBR seal |
| Protection | IP65 |
Typical values for this family. The datasheet issued with your quotation states the exact figures for the unit supplied.
Features
- Trip point readable on the scale without a gauge
- Terminal block inside the housing, no flying leads
- Repeatability within 3 % of set point
Options
- Stainless body for water and weak chemicals
- Explosion-proof housing on request
- Factory set point stamped on the tag
Typical applications
- Pump start/stop and dry-run protection
- Filter fouling alarm on a bypass line
- Compressor interlock
More in Pressure
Same family, same quotation process. Open a product to compare parameters side by side.
Bourdon tube pressure gauge, Ø100
The general-purpose gauge most lines are still specified with: dry or liquid-filled case, 0–40 bar.
Process pressure gauge, Ø150
Large dial, all-stainless wetted parts, ±1.0 % FS — for operators who read it from the walkway.
Pressure transmitter, 4–20 mA
Piezoresistive transmitter with a 316L diaphragm; 0–16 bar, two-wire, HART on request.