Pressure transmitter, 4–20 mA
Piezoresistive transmitter with a 316L diaphragm; 0–16 bar, two-wire, HART on request.
Line illustration. Photographs of the supplied unit and its nameplate are sent with the quotation.
Overview
The workhorse of most orders: a stainless piezoresistive sensor, a 4–20 mA two-wire loop, and a housing that can be fitted with a local LCD. Zero and span are adjustable from the outside without breaking the seal.
Specifications
| Range | 0–100 mbar up to 0–60 bar, adjustable |
|---|---|
| Accuracy | ±0.5 % FS (0.25 % optional) |
| Output | 4–20 mA, two-wire, HART 7 optional |
| Process connection | G1/2, 1/2 NPT or M20 × 1.5 |
| Wetted parts | 316L diaphragm, 304 housing |
| Protection | IP65, –20 to +85 °C |
Typical values for this family. The datasheet issued with your quotation states the exact figures for the unit supplied.
Features
- External zero/span trim without opening the cover
- Reverse polarity and surge protection on the loop
- LCD with 4-digit display and bar graph option
Options
- HART hand-held or PC configuration
- Diaphragm seal for viscous or crystallising media
- Hazardous-area version (Ex ia) on request
Typical applications
- Line pressure to a PLC or DCS analogue card
- Pump and compressor discharge monitoring
- Retrofit of a mechanical gauge position
More in Pressure
Same family, same quotation process. Open a product to compare parameters side by side.
Bourdon tube pressure gauge, Ø100
The general-purpose gauge most lines are still specified with: dry or liquid-filled case, 0–40 bar.
Process pressure gauge, Ø150
Large dial, all-stainless wetted parts, ±1.0 % FS — for operators who read it from the walkway.
Differential pressure transmitter
Two-port DP cell for filter monitoring and flow by orifice; 0–250 kPa, square-root output available.